How to Install a HBOT Chamber in Your Clinic?

How to Install a HBOT Chamber in Your Clinic?

This is rather easy. For the smaller hard shell single user sit up HBOT chambers, it’s simply plug and play! Due to their weight and size, we will need at least two people to carry them into the preferred place of operation within your clinic or spa. Though of course with our HBOT Chambers this is all done for you, being a complete turnkey solution for you.

Then for the larger multi-person hard shell HBOT chambers, these are again best installed by us for you. They come in parts due to their size and will need to be securely put together. In this case, it really is a matter of sit back and relax while we do all the work.

Then there are just a few things to consider, about your property, these are:

  1. Size of the room to have the HBOT chamber.
  2. Door widths of all the doors requiring going through.
  3. Extreme cases, load bearing level of your floors.

 

Though the main aspects to consider in order to have a HBOT chamber at your spa or clinic is, will it fit.

 

Minimum Room Size Required for Your HBOT Chamber?

It’s not just the HBOT Chamber itself you have to consider from a minimum size perspective as you will require at the very minimum an air compressor and an oxygen generator to operate the HBOT Chamber. I cannot recommend enough however the need for an air cooler as well. These things get very hot in the summer without the air cooler. You have been warned!

So based on a single user hard shell HBOT Chamber (there are smaller options however, they can’t physically be that much smaller!), you are going to need a room at least 280cms or 9 foot wide. You then want to allow for space around the HBOT Chamber and in front of the HBOT Chamber to get inside, ventilation and of course to set it up in that room.

The room length you would require is around 550 cms or 18 foot. You can get away with smaller, however this allows for a very nice and relaxed setup.

 

Minimum Room Size Required for a Multiuser Hard Shell HBOT Chamber?

Again bearing in mind the factors we mentioned above such as air compressor, oxygen generator and air cooler, along with space to maneuver and set up your multi-user hard shell HBOT Chamber.

The location of the door to enter the room is going to have a bearing on the size and also the shape of the room as well. However, for a two person hard shell HBOT chamber, you are looking at a minimum room length of 300 cms or 10 foot.

Then for the minimum width, we would want a room of at least 440 cms or 14 foot.

 

Minimum Door Width Required for Your HBOT Chamber?

You might have enough rooms and enough space in each room, however can your new HBOT chamber fit through your front door, up your stairs and finally into its intended final resting place?

I know this seems so obvious however you would be surprised at the number of people who don’t think of this and just assume! Which is why it’s our job to ensure you do things right and get all aspects covered!

If you are opting for a soft shell HBOT Chamber this is not something you have to concern yourself with unless you live in some hobbit styled house!

This gets hard to answer on an individual basis as some of the largest HBOT Chambers often have the option to come in parts that are made up on site. This means you can ironically often get larger HBOT chambers through a normal sized door than some of the smaller, yet one piece HBOT chambers.

This is something that needs to be discussed on an individual basis. However our HBOT Chambers can all comfortably fit through a door width of 78cms due to the modular nature of their design.

 

Weight & Floor Strength for Your HBOT Chamber

For most types of HBOT Chambers this is not a consideration, and only a consideration when going for the larger and heavier hard shell HBOT Chambers that weigh over c.500 KG and you know that you have weaker flooring or you have a suspended wooden floor, as opposed to concrete floor.

This is not something I can answer for you and something you will need to assess yourself as

all floors are different, both in material used and the design of the structure. Our HBOT chambers start off at just 400 KG which makes them great for the majority of floors.


Want to Know More About HBOT Chambers?

If you like what you have read and want to know more about HBOT Chambers, then just fill out the form below and we can send you out a free copy of our “Buyers Guide to HBOT Chambers”.

 

Fill In Your Details Below Now

FREE Business Guide

  • This field is for validation purposes and should be left unchanged.